Displays & CPUs



WW650	Offshore Load Moment Indicator with built-in-data-logging facility for hazardous:- Zone 1, Zone 2 Applications.

W2180	Safe Load Angle Indicator.

W2175	Safe Load Indicator.

W2240	Safe Load Moment Indicator with password protection.

i3000	The i3000 model is designed to be a crane information center with advanced features for data collection, display or remote transmission. It is used as a rated capacity indicator, range limiting device, load indicator, outrigger monitoring, slew indication, Anti-Two-Block system, margin of safety and an optional data logger.

W940	Overload Indicator for Lorry, Telescopic Handler & Knuckle Boom Cranes.

W2230	Safe Load Moment Indicator for Tower Crane with password protection.

Tracker 220	Load Indicator for Passenger Hoist.

Excavator LMI	LMI System for excavators


Back to Top
OFFSHORE CRANE INDICATOR WW650

Features And Benefits

•	System basedon the latest technology
•	High speed data collection
•	Clear analogue indication of % Safe Working Load
•	Flexible construction to optimise specification for all offshore crane users
•	Clear audible warnings of approach and overload
•	Security code protection available for supervisor access only
•	Manual or remote s election of active hoist and sea state/platform duty
•	Time, date and percentage use of data logger memory selectable by pushbutton
•	Comprehensive self test facility
•	Manufactured to ISO 9001 quality standards
•	Clear simultaneous digital indication of Actual Load, Safe Working Load, Operating Radius, Sea State, Hook Selection, Parts of Line and percentage total moment


Optional Features
•	Data logging facility
•	Alternative Display Language
•	Hook Height Indication
•	Annunciator for Engine Monitoring
•	Suitable for Zone 1 or Zone 2 applications

TECHNICAL DATA
Approved Certificate number	CON (LO) 1990/1 (General) 1 May 1990
British Standard Reference	BS7262 1990
Accuracy	±3.75% SWL
Temperature range	Operating -20 C to 60 C
	Storage -30 C to 80 C
Supply Voltage	110 to 240V AC or 24V DC
Inputs (options)	4 analogue inputs to monitor sensors
	8 Namur 2-wire suitable for hazardous area
	4 opto-isolated
Outputs (options)	2 volt free relay contacts
	3 voltage outputs with optional Zener protection
Volt-free Relay Ratings	2A @ 30V DC with changeover contacts
Data Logger	3 ½ Mbytes storing up to 150,000 lifts
Display size	240 x 200 x 110 mm
Display sealing	IP 65


Back to Top
CRANE LOAD AND ANGLE INDICATORS W2175 - W2180

Features And Benefits For W2175 and W2180

•	Choice of load sensors including dead-end load cells, load pins, line riding dynamometers.
•	Compatible with most existing sensors for load, anti two-block and lock-out.
•	Continuous display of load on hook, current hoist selected and part of lines settings.
•	Audible and visual alarms indicating two block and load limit conditions.
•	Clear backlit weatherproof digital display panel.
•	Easy calibration via keypad. No additional programming hardware necessary.
•	Quick and easy installation.

Additional Feature For The W2180

•	Adjustable high and low angle limits.

APPLICATIONS
Hydraulic cranes	Lattice cranes
Port cranes	Rail cranes
Dock cranes	Line tensions indicators
Tower cranes	10 to 30 volts

TECHNICAL DATA
Display size	6.875" x 3.125" x 2.250"
Display format	16 characters x 2 lines
Display sealing	IP64
Power supply range	10 to 30 volts
Temperature	-10 °F to 120 °F
Protection	Motion cut facility
Sensor supply	5 volts


Back to Top
RATED CAPACITY INDICATOR W2240

Features And Benefits

•	The W2240 is a Rated Capacity Indicator with chart programming.
•	Indication of approach overload alarms, percent SWL, anti-two-block, rope limits.
•	The processor is self-contained in the display. This reduces cab based hardware.
•	Data protection in case of failure.
•	Settable limits for load, angle, length and radius are standard.
•	Continuous display of SWL and parts of lines settings. All system settings are saved on system power down.
•	Compatible with most existing competitive sensors for load, angle, length, anti-two-block and lock-out.
•	Quick & easy installation and calibration. Calibration is password protected. An ideal system for any size of crane.
•	Motion cut-out output.
•	Audible and visual alarms warn the operator of approach to overload and capacity overload.
•	Intelligent self-diagnostics system warns the operator of any type of system failure.

APPLICATIONS
Telescopic cranes	Lattice cranes
Port cranes	Rail cranes
Dock cranes	Line tension indicator

TECHNICAL DATA
Control box dimensions	7.6" x 3.7" x 3.3"
Power	10 to 28 volts
Temperature	-10 F to 120 F
Protection	Low, overload and short circuit
Sound alarm	80 Db in cab With option: 112 Db outside
Sensor supply	5 volts
Illumination	Key pad controlled
Relay outputs	INC-No2 amp outputs


Back to Top
CRANE INFORMATION CENTER I3000

Features And Benefits

•	Graphical display with backlight, wide view angle, anti-reflective window.
•	Built-in bar graph.
•	Tare facility with indication of tared value.
•	Low voltage, overload and short circuit.
• • •	Calibration is password protected. View all necessary information at a glance. Continuous indication of duty and falls settings.
•	Meets all known American, European and international safety standards.
•	Data protection in case of failure.
•	Hoist rope overload protection.
•	Motion cut option.
•	Audible and visual alarms.
•	Reverse video display for low-light viewing.
•	Self-diagnostics systems warns the operator of any type of system failure.
•	Quick and easy installation as well as calibration.

• Sealed touch-sensitive control panel.

• Pop-up window selection.

• Keypad is used for all calibration routines (no additional device needed).

• Alternative languages available.

• Compatible with most exisiting competitive sensors.

• Load input from pressure sensors, tension links, load pins, or any strain gage device.

APPLICATIONS
Telescopic cranes	Lattice cranes
Port cranes	Rail cranes
Dock cranes	Tower cranes

TECHNICAL DATA
Accuracy	± 3.75 % SWL
Operating Temperature	-20°C to ±70°C
Supply Voltage	11 to 36 VDC
Display Dimensions	5" x 6" x 2.5"
Display Sealing	IP65
Duty Storage	10,000 load/radius curves
I/Os	6 analog inputs 4 analog outputs 17 digital inputs 5 relay outputs
Peripheral Communications Port	RS-232
Relay outputs	3NO/NC rated @30A 2NO/NC rated @10A


Back to Top
OVERLOAD INDICATOR W940

Features And Benefits

•	Visual display provides continuous awareness of loading.
•	Clear display showing proportion of loading using coloured high intensity LED's.
•	Clear visual and audible warnings of approach and overload.
•	Straightforward installation.
• •	Simple calibration. Waterproof housing.

Options
•	Second display.
•	Volt free contacts for motion cut out.
•	Automatic derate facility.
•	Full range of hydraulic adaptors available.

• Multiple duty capacity.

APPLICATIONS
Knuckleboom	Telescopic handler

TECHNICAL DATA
Accuracy	+2%
Temperature range	-20° to 60° C
Measuring range	0 to 300 bar
Display sealing	IP 67
Power supply	12 or 24 V DC
Display size	5" x 61/2" x 21/4"
Amplifier size	5" x 61/2" x 21/4"


Back to Top
RATED CAPACITY INDICATOR W2230

Features And Benefits

•	The W2230 is a Rated Capacity Indicator with chart programming especially designed for tower cranes.
•	Indication of approach overload alarms, percent SWL, anti-two-block, rope limits.
•	The processor is self-contained in the display. This reduces cab based hardware.
•	Intelligent self-diagnostics system warns the operator of any type of system failure.
•	Continuous display of SWL and parts of lines settings. All system settings are saved.

APPLICATIONS

Tower Cranes

TECHNICAL DATA
Control box dimensions	3.9" x 3.2" x 77/8"
Protection	Low, overload and short circuit
Power	10 to 28 volts
Temperature	-10° to 120° F
Sound alarm	80 Db in cab With option: 112 Db outside
Sensor supply	5 volts
Relay outputs	INC-No2 amp outputs


Back to Top
DIGITAL PANEL INDICATORS TRACKER 220

Features And Benefits

•	Fully scalable for mV, mA, voltage and resistance inputs.
•	Alarm features including delay, latching, hysteresis, deviation and setpoint
•	Configuration via front panel push buttons or Windows software.
•	24 Point user linearization.
•	Univeral input, analogue output, digital status inputs, transmitter & transducer supplies, IP65 front panel, standard 1/8 DIN size, red or green LED display, programmable function buttons, maths functions, serial communications, four alarm set points, wide ranging power input.

INFORMATION

A variety of pressure transducers, pressure transmitters or strain guage bridges can be connected to the Tracker 220 series. The indicator and sensor can be matched using the user calibration feature, greatly reducing errors due to sensor output and excitation supply voltage variations. A front panel button or digital status input can be configured to provide an auto zero feature allowing zero offset errors to be eliminated. For weighing applications, a tare function can be similarly configured.

TECHNICAL DATA
Front Panel	Protection to IP65 (NEMA4)
Dimensions	48mm (H) x 96mm (W) x 173mm (D)
Panel Cutout	44mm (H) x 92mm (W)
Depth Behind Panel	166mm including terminals
Weight	0.4kg maximum. Packed weight 0.55kg


Back to Top
EXCAVATOR LMI SYSTEM

Features And Benefits

•	Measurement of actual load by means of hydraulic pressure transducers.
•	Geometric measurement if boom and stick
•	Monitoring of excavator capacity chart
•	Visible and audible alarm in case of overload
•	Backlit dot matrix display for nighttime operation
•	Easy installation
•	Easy calibration via key pad
•	Simultanenous display of all operating parameters ( SWL, actual load, working radius, angles, height and utilization )
•	Cost effective